![]() It should be noted that even though they are disabled, flashing a new image to the device will re-enable them. In the top menu go to System → Startup, and disable firewall, dnsmasq and odhcpd in the list of startup scripts. I noticed that OpenWRT started giving out DHCP leases - You can disable this in the Interfaces/LAN settings Ignore interface: Disable DHCP for this interface.:Īnd setting everything to disabled in the DHCP/IPv6 Settings: ![]() The OpenWRT WebUI should now be available on the Ip address you set above e.g. Unplug the LAN cable, switch your PC back to it's original IP and connect both to your router. ![]() Now we can change the login and assign a static IP address inside our own Network IP address space: passwd root In order to prevent unauthorized SSH the WebUI is also available under this address: Use the "passwd" command to set up a new password There is no root password defined on this device! The Default IP of your OpenWRT server is 192.168.1.1 - connect to it with your SSH client ssh BusyBox v1.33.1 ( 22:20:08 UTC) built-in shell (ash) Insert the MicroSD into your Pi4B and plug in the powerĬonnect your PC to your Raspberry Pi via an Ethernet cable and change your network settings to an address inside 192.168.1.* - e.g.Use BalenaEtcher software to write the img file to your MicroSD card's.Direct Download Link: openwrt-21.02.0-bcm27xx-bcm2711-rpi-4-squashfs-factory How to flash OpenWrt to MicroSD card
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |